[manual index][section index]

NAME

ScsiIO: Scsi - SCSI device operations

SYNOPSIS

include "scsi.m";

scsiio := load ScsiIO ScsiIO->PATH;
Scsi: adt {
    inquire:    string;
    rawfd:      ref Sys->FD;
    nchange:    int;
    changetime: int;

    open:       fn(devdir: string): ref Scsi;
    rawcmd:     fn(s: self ref Scsi, cmd: array of byte,
                   data: array of byte, io: int): int;
    cmd:        fn(s: self ref Scsi, cmd: array of byte,
                   data: array of byte, io: int): int;
    ready:      fn(s: self ref Scsi): int;
};

Sread, Swrite, Snone: con iota;

scsierror:  fn(asc: int, ascq: int): string;

init:   fn(verbose: int);

DESCRIPTION

ScsiIO provides a low-level interface to a SCSI or ATAPI device via sd(3).

Init must be called before using any other operation of the module. If verbose is non-zero the module will produce a fair amount of debugging output on file descriptor 2 when SCSI commands fail.

Scsi.open attempts to open the file devdir/raw on which to send raw SCSI commands. On success, it reads the device's inquiry string and returns a reference to a Scsi value to represent the connection. It provides the following operations:


s.ready()
Sends the ``unit ready'' command up to three times, returning zero once the unit responds that it is ready, or -1 on error.
s.rawcmd(cmd, data, io)
s.cmd(cmd, data, io)
Both these functions execute a single SCSI command on the named device. The command data is in the byte array cmd. If io is Sread, a successful operation will store the resulting bytes in data, up to its length, returning the number of bytes stored. If io is Swrite, the bytes in data are transmitted as the data argument to the command, and the number of bytes written is returned. If io is Snone, data is ignored and may be nil. Rawcmd simply issues the command and returns the result; cmd works a bit harder and is the more commonly used routine. It attempts to send the commmand; if it is successful, cmd returns the result. Otherwise, cmd sends a request sense command to obtain the reason for the failure, sends a unit ready command in an attempt to bring the unit out of any inconsistent states, and tries again. It also accounts for media change. If the second try fails, cmd returns an error. On error, both functions return -1 and set the system error string.

The nchange and changetime elements of Scsi the number of times a media change has been detected, and the first time the current media was detected (the first time a SCSI command was issued after it was inserted). They are maintained by Scsi.cmd. The initial SCSI inquiry result is kept in inquire.

Scsierror returns a textual description of the SCSI status denoted by the ASC and ASCQ sense codes. The description is found by consulting /lib/scsicodes.

FILES

/lib/scsicodes
List of textual messages corresponding to SCSI error codes; consulted by scsierror.

SOURCE

/appl/lib/scsiio.b

SEE ALSO

disks(2), sd(3)

SCSIIO(2 ) Rev:  Thu Feb 15 14:43:27 GMT 2007